Winding The Bobbin; Setting The Spool; Additional Spool Pin; Removing The Bobbin - Baby Lock Molly BL30A Instruction And Reference Manual

(A)
q
(B)
w
e
r
t
q
w
e

Winding the Bobbin

Setting the spool

Place a spool of thread on the spool pin with the thread
coming off the spool as illustrated.
A: Press the large spool holder firmly against the spool
of thread.
q Large spool holder
B: For a small spool, use the small spool holder.
w Small spool holder
NOTE:
Spool holder should always be the same size or larger
than the spool of thread that is being used to avoid
thread getting caught on rough edges of the spool.

Additional spool pin

The additional spool pin is for bobbin winding without
unthreading the machine.
Insert the additional spool pin into the hole.
Place the felt and a spool on the pin.
e Additional spool pin
r Spool pin felt
t Spool pin hole

Removing the bobbin

z Push the hook cover plate release button to the right
and remove the cover plate.
q Hook cover plate release button
w Hook cover plate
x Lift out the bobbin.
e Bobbin
20