Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Memo
Press
want to stop the sewing machine in the
middle of sewing without reverse stitching or
reinforcement stitching (for example, when
you want to change the sewing direction).
The sewing machine stops without reverse
stitching or reinforcement stitching.
Press
button) at the end of the stitching.
a Stop the machine and change the sewing
direction.
b Start the machine again.
Automatically cutting
the thread
The sewing machine can be set to automatically cut
the threads at the end of the stitching. This is called
"programmed thread-cutting".
If programmed thread-cutting is set, automatic
reverse/reinforcement stitching is also set.
a
Turn on the machine.
The LCD comes on.
(Start/stop button) when you
(Reverse/reinforcement stitch
1
2
4
3
b
b
Press the stitch selection.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 47).
c
Press
set for programmed thread-cutting and
automatic reverse/reinforcement stitching.
a
To turn programmed thread cutting off,
press
d
Position the fabric under the presser foot, and
then press
a Start/stop button
Stitching starts after reverse stitching or
reinforcement stitching.
on the screen.
You get
, and the sewing machine is
Memo
.
(Start/stop button) once.
a
Useful Functions 61
2
Advertisement
Table of Contents
