Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
b
Place the embroidery sheet on the inner frame.
a Embroidery sheet
b Inner frame
Line the mark on the fabric up with the base
c
line on the embroidery sheet.
a
a Base line
b Mark
Place the inner frame with the fabric on the
d
outer frame and stretch the fabric.
• For details, refer to page 139.
Remove the embroidery sheet.
e
a
b
b
■ Embroidery on fabrics that cannot be stretched
on an embroidery frame
When small pieces of fabric that cannot be
stretched on an embroidery frame or thin pieces
like ribbon are being embroidered, use stabilizer
material as a base to stretch on the frame. Spray
stabilizer with a thin layer of fabric glue or
temporary adhesive and place embroidery piece,
right side up onto stabilizer base. We recommend
stabilizer material for all embroidery.
a Stabilizer material
b Tack or spray glue
c Fabric
After completing the embroidery, remove the
stabilizer material carefully.
Preparing the Fabric 141
a
b
c
a
4
c
b
a
c
Advertisement
Table of Contents
