Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Removing the embroidery
frame
Make sure that the sewing machine is completely
stopped and follow the instructions below.
a
Raise the presser foot lever.
a Presser foot lever
b
Press
twice to raise the needle.
a Needle position button
c
Press the tab of the embroidery frame holder
to the left side, and raise the embroidery
frame.
a Press here to remove.
The embroidery frame will separate from the
embroidery frame holder.
a
(Needle position button) once or
a
d
Pass the embroidery frame under the presser
foot while raising the presser foot lever even
further.
e
Remove the embroidery frame.
CAUTION
● Do not touch the start/stop button,
needle position button or reverse/
reinforcement stitch button. If one of the
buttons is accidentally pressed, the
machine will begin sewing and your
finger may be pricked with the needle or
the needle may break.
Attaching the Embroidery Frame 143
4
Advertisement
Table of Contents
