Choosing & Installing A Saw Blade - Axminster Excalibur EX-16 User Manual

Installation & Assembly
Saw guard assembly
b
a
Slot the guard clamping arm (d) through the pre-drilled hole in the hexagon clamp (c). Insert the hexagon
clamp (c) into the brackets hexagon recess, place the washer (b) over the hexagon clamp thread and secure
using the butterfly clamping knob (a).
NOTE: DO NOT OVERTIGHTEN otherwise you may strip the thread
b
c
e
f
d
g
Choosing & Installing a Saw Blade
c
a
d
It is strongly recommended that you mount the machine to a
workbench or to a purpose built stand, a pad between the
scroll saw and the workbench/stand is also recommended to
reduce vibration.
Drill four 8mm holes in your workbench/stand and secure using
nuts bolts washers (Not Included).
08
d
c a
d
Saw guard assembly (d) assembled
b