Friedrich KUHL R-410A Service Manual page 79

Step 4 Checking the Remote Control's OPT # Code
With the Remote Control's display illuminated, press and hold the Remote Control's
SCHEDULE
the Remote Control displays its current OPT# Code.
If the OPT# Code is different than the AC Unit's OPT# Code see instructions below:
Using the Remote Control's
displayed on the Remote Control to match the OPT # Code shown on the Air
Conditioning Unit's display
Air Conditioning Unit Display
Step 5. To save the setting in the Remote Control, press and hold the Remote Control
and FAN SPEED
configuration number on the Remote Control flashes.
The Remote Control is now configured to work with the air conditioner.
78
and the FAN SPEED
Remote Control
(see examples below)
Key simultaneously for approximately 6 seconds until the displayed
Keys simultaneously for approximately 6 seconds until
Remote Control's OPT# Code
Figure 2
Increase or Decrease Keys, change the OPT# Code
.
Kühl Remote Control
(see example below Fig 2)
Remote Control Display
SCHEDULE