Avaya IP Office CTI Link Programmer's Manual page 13

type
15 Called party
number
16 Calling party
presentation &
type
17 Calling party
number
18 Called sub
address
19 Calling sub
address
20 Dialled party type Number
21 Dialled party
number
22 Keypad type
23 Keypad number
24 Ring attempt count Number
25 Cause
26 Voicemail disallow Number
27 Sending complete Number
28 Call type & -
Transport type
29 Owner hunt group
name
30 Original hunt
group name
31 Original user name String
32 Target hunt group
name
33 Target user name String
34 Target RAS name String
35 IsInternalCall
36 Time stamp
37 Connected time
38 Ring time
39 Connected
duration
40 Ring duration
41 Locale
42 ParkslotNumber
43 Call waiting
44 Tag
45 Transferring
46 Service active
47 Service quota
DevLink Programmer's Guide
IP Office CTI Link
found in the called party number field.
The format of the string is "Number.Number".
String The identifier or number of the called party.
String This field contains two numbers: 1) an indicator of how the
calling party details should be presented, and 2) the type of data
to be found in the calling party number field.
The format of the string is "Number.Number".
String The identifier or number of the calling party.
String The sub address of the called party.
String The sub address of the calling party.
The type of data to be found in the dialled party number field.
String The identifier or number of the dialled party.
Number The type of data to be found in the keypad number field.
String The dialled digits.
The number of times this call has been presented to a target.
Number The reason the call is in it's current state. See the table below for
further details.
1 if the call cannot divert to voice mail.
1 if overlap dialling is complete.
String This field contains two numbers: 1) call type, e.g. speech, video
and 2) the transport type, 0=circuit, 2=packet.
The format of the string is "Number.Number".
String The name of the hunt group where the call is currently queued.
String The name of the hunt group where the call was originally
targeted.
The name of the user where the call was originally targeted.
String The name of the hunt group where the call has been targeted at.
Name of user to which the call is being targeted.
The name of the internal port where the call is being targeted.
Number 1 the call is internal, otherwise 0.
String The time the call was created (internal tick count).
Number The time the call was connected.
Number The time the call started ringing.
Number The duration the call has been connected or was connected for.
Number The duration the call has been ringing or was ringing for.
String Locale identifier (same as the locale setting in Manager).
String When the call is parked, the B end is undefined, and this field
contains the park slot number.
String 1 if the call is a call waiting call
String Contains the tag, which may be applied through TAPI, Voice
Mail/Pro or SoftConsole.
Number Non-zero indicates that the call is being transferred.
Number Non-zero if the service is active.
Number Non-zero if the service quota is used.
DevLink Real-Time Event Stream
40DHB0002UKAD Issue 11a (14th June 2005)
Page 13