Advertisement
IGNITION CONTROL DOOR LOCKS (OPTIONAL)
If the vehicles door locks have been interfaced to the Security System, the
Security System will automatically lock the vehicles doors when the ignition is
turned "ON" and/or unlock the vehicles doors when the ignition is turned "OFF".
Note:
If any door is open when the ignition is turned "ON", the Security
System will not automatically lock the vehicles doors.
LED STATUS INDICATOR
1.
LED OFF: Security System is disarmed
2.
LED ON: Security System is in valet mode
3.
LED FAST FLASHING: Automatic arming timer is counting down
4.
LED FLASHING: Security System is armed
5.
LED FLASHING AFTER DISARMING: Security System Violation
a)
1 Flash - Ignition Violation
b)
2 Flashes – Trunk / Hood Violation
c)
3 Flashes – Door Violation
d)
4 Flashes – Shock Sensor / Auxiliary Sensor Violation
Note:
Your AutoPage Security System is equipped with a Violation Memory
feature which will inform the user of the last two violations by the
sequence of flashes from the Security Systems LED. The Violation
Memory feature will reset once the vehicles ignition is turned to the
"ON" position.
CHIRP AND PARKING LIGHT FLASH INDICATORS
1.
1 Chirp & 1 light flash = Security System is armed
2.
2 Chirps & 2 light flashes = Security System is disarmed
3.
4 Chirps & 3 light flashes = Security System breach or intrusion in your
absence.
DOMELIGHT ILLUMINATED ENTRY (OPTIONAL)
Your AutoPage Vehicle Security System is equipped with a domelight illuminated
entry feature which w ill turn on the vehicles interior lights for 30 seconds after the
Security System is disarmed / unlocked. This feature will reset once the vehicles
ignition is turned "ON" or if the Security System is re-armed.
PATHWAY ILLUMINATION (OPTIONAL)
When disarming the Security System, the vehicles parking lights will stay on
illuminating your pathway to the vehicle. The vehicles parking lights will stay on
for 30 seconds or until the vehicles ignition is turned to the "ON" position.
30 SECOND ARMING DELAY
After arming your vehicle with the Remote Control Transmitter, the siren will chirp
(1) time and the vehicles parking lights will flash (1) time. The Security System
will instantly go into a 30-second standby mode to monitor all Security System
functions. After the 30 seconds has elapsed, the Security System is now fully
armed. If a door is opened or if you have a faulty sensor, the Security System will
give a warning by chirping the siren (3) times.
SHOCK SENSOR
Your AutoPage Security System includes a dual zone shock sensor designed to
trigger the Security System from impact to the vehicle, such as a window being
broken. If sensitivity adjustment should become necessary consult your local
Authorized Dealer. Do not attempt to do this on your own!
SENSOR BYPASS
Your AutoPage Vehicle Security is equipped with a sensor bypass feature that
disables the shock & option sensors in the event your vehicle is subject to false
alarms. To enable the sensor bypass mode, simply press the LOCK button twice
within 3 seconds when arming the Security System. The Security System will
chirp one additional time to confirm the sensor bypass mode was activated. The
Sensor Bypass feature is programmed to activate for one arming cycle only. The
Security System will return to normal operation during the next arming cycle.
STARTER DISABLE FEATURE (OPTIONAL)
If installed with your Security System, this feature is designed to prevent a thief
from starting your vehicle once they have broken in to it.
SECOND CAR OPERATION
Your AutoPage Security Systems Remote Control Transmitter can be utilized to
control a second vehicle equipped with an RF-305 or RF-405. If your Remote
Control Transmitter is programmed to a second vehicle, the Remote Control
Transmitter will operate as follows:
1.
Push the Green side shift button on the right side of the Remote Control
Transmitter, the LED will illuminate for 3 seconds.
2.
While the LED is illuminated, push the desired button operation. For
Example: To Arm the second vehicle, simply push the Green side shif t
button once then push the Lock/Arm button while the LED is illuminated.
th
1815 West 205
Street
Suite 101
Torrance, California 90501-1525
Main Office: 310-618-2002
RF405A
PROFESSIONAL VEHICLE SECURITY
OPERATIONS MANUAL
THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION
ONLY
Advertisement
