Page 1
Aries MK300 u s e r ` s g u i d e Important Export Restrictions! Commodities, products, technologies and services contained in this manual are subject to one or more of the export control laws and regulations of the U.S. Government...
NOTE: Receptor attachment screws may need to be tightened after continuous shooting. mounTing sysTem The ATN Night Vision Riflescopes Mounting System allows to change the position of the riflescope flexibly on the weapon in relation to a shooter in combination with the fixed positions already available on the weaver rail.
Page 4
To change the position of the riflescope on the weaver rail Rail with Weaver a fixing additionally follow the steps mentioned below: rail projection 1. Unscrew the two screws, which attach the rail to the Grooves mounting bracket. 2. Take the rail out of the groove. 3.
Page 5
You could change the IR control panel fitting your needs. The screw-tool included into the set should be used for weakening the fixing screw located on the IR. Rotate the IR placing at in the most convenient position. Tighten the screw with the screw-tool to fix the new position. Battery IR Brightness Housing...
wArnings AnD cAuTions • Always remember to turn off the Aries scope when it is not in use. If you do not plan on using your aries scope for a period of more than 10 days, you should remove the batteries. •...
ATN, at its option, will either repair or replace the product, and such action on the part of ATN shall be the full extent of ATN’s liability, and the Customer’s sole and exclusive remedy. This warranty does not cover a product (a) used in other than its normal and customary manner;...