Table of Contents
Advertisement
Quick Links
Aries mk410 "spartan"
ArIeS 410 "SPArTAN" USer'S GUIDe (rev. 3, SePTemBer 2010)
u s e r ` s
g u i d e
important export restrictions! Commodities,
products, technologies and services contained in
this manual are subject to one or more of the export
control laws and regulations of the U.S. Government
and they fall under the control jurisdiction of either the
US Department of State or the US BIS-Department
of Commerce. It is unlawful and strictly prohibited
to export, or attempt to export or otherwise transfer
AmericAn
or sell any hardware or technical data or furnish any
service to any foreign person, whether abroad or in
Technologies
the United States, for which a license or written ap-
proval of the U.S. Government is required, without
neTwork
first obtaining the required license or written approval
from the Department of the U.S. Government having
corp.
jurisdiction. Diversion contrary to U.S. law is prohibited.
Advertisement
Table of Contents
Related Manuals for ATN Aries MK410 "Spartan"
Summary of Contents for ATN Aries MK410 "Spartan"
- Page 1 Aries mk410 “spartan” ArIeS 410 “SPArTAN” USer’S GUIDe (rev. 3, SePTemBer 2010) u s e r ` s g u i d e important export restrictions! Commodities, products, technologies and services contained in this manual are subject to one or more of the export control laws and regulations of the U.S.
-
Page 2: Optional Accessories
The information in this manual furnished for information use only, is subject to change without notice, is not to be construed as a commitment by ATN Corp. ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book. ©2010 ATN Corp. All right reserved. -
Page 3: Preparation For Operation
• Dimensions: 275 mm x 108 mm x 90 mm /10.8” x 4.3” x 3.6” • Weight: 1.68 kg /3.7 lbs * ATN reserves the right to change the above specifications at any time without notice prepArATion For operATion Before getting started make sure to follow these steps: •... -
Page 4: Mounting System
NOTE: Receptor attachment screws may need to be tightened after continuous shooting. mounTing sysTem The ATN Night vision riflescopes mounting System allows to change the position of the rif- lescope flexibly on the weapon in relation to a shooter in combination with the fixed positions already available on the weaver rail. - Page 5 Focusing To focus your riflescope you will need to adjust the ± 5 Diopter diopter first thing. Simply turn the diopter clockwise until it stops. Then, while looking through the diopter at a subject, slowly turn the diopter back counter clockwise until the grain in the image is sharp.
-
Page 6: Warnings And Cautions
cleAning The eyepiece you may need to clean the eyepiece of the riflescope from time to time in order to guarantee top performance. When you receive your riflescope you should check for dust on the eyepiece of the unit. First you will need to remove the eyepiece. To do that you will need to initially loosen the fixing screw that can be found on the base. -
Page 7: Year Product Warranty
ATN, at its option, will ei- ther repair or replace the product, and such action on the part of ATN shall be the full extent of ATN’s li- ability, and the Customer’s sole and exclusive remedy. This warranty does not cover a product (a) used in other than its normal and customary manner;... - Page 8 800-910-2862, 650-989-5100; fax: 650-875-0129 European Office The following countries can use our toll free number: 00 800 9102-8620 Austria, France, Germany, Holland, Italy, Spain, Sweden, Switzerland For other countries, please use 38 048-7770214 or 38 048-7770345 www.atncorp.com ©2010 ATN Corporation...