Attaching Adapter To Atn Ps-15 - ATN PS-15 Operator's Manual

3.1.7.MOUNTING THE ATN PS-15 TO MICH OR
PASGT HElMET MOUNT
To mount the ATN PS-15 to a mICH or PASGT helmet mount, per-
form the following:
1. loosen the screw (A) of adapter. Push the button (b) and slide
the rail (C) of the PS-15 into the socket of the adapter. Push the
button until the adapter will lock the alignment groove in the
rail. Tighten the screw (A).
A
FIGURE 3-8. ATTACHING AdAPTER TO ATN PS-15
2. Align the adapter and the helmet mount. Slide the device rear-
wards until the alignment boss (Figure 3-9, (A)) aligns with
the alignment groove (b) on the helmet mount. Push until the
adapter locks into the helmet mount.
FIGURE 3-9. ATTACHING ATN PS-15 TO HElMET MOUNT
3. Adapter allows using the PS-15 with PvS head mount also.
FIGURE 3-10. ATTACHING ATN PS-15 TO PVS HEAd MOUNT
3-6
A
b
b
A
C