3.1.3. MOUNTING THE PICATINNY AdAPTER TO
THE ATN PS-15
mount Picatinny adapter(A) onto one of the rails on the goggles.
Tighten two fixing screws(b) of the adapter.
FIGURE 3-3. MOUNTING THE PICATINNY AdAPTER TO THE ATN PS-15
3.1.4. MOUNTING IR450 TO THE ATN PS-15
Ir450 may be mounted on the goggles through the Picatinny
adapter.
1. Install the Picatinny Adapter on one of the goggles rails
(Item 3.1.3.).
2. loosen the Ir450 fixing screw.
3. mount the Ir450 on the Picatinny Adapter and tighten the fix-
ing screw.
3.1.5. MOUNTING CAMERA/CAMCORdER TO THE
ATN PS-15
1. Screw Camera Adapter (Figure 3-5, (A)) into the front lens of
a photographic camera (thread m52x0.75) or a video camera
(use adapter ring threaded m37x0.75 (Figure 3-6)).
2. remove the rubber eyecup off one of the goggles eyepieces.
3. Connect the adapter with the eyepiece and gently tighten 3
fixing screws (Figure 3-5, (b)) on the adapter.
3-4
FIGURE 3-4. ATN PS-15 wITH IR450
A
b