ATN PS-15 Operator's Manual page 23

positioned directly in front of the user's eyes or flipped up out of
the viewing position.
1. Install the mount onto the helmet as shown on the picture.
2. Tighten and fix the straps (A)
3. Attach the goggles to the rail.
4. loosen screw (C). Push button (b) and insert the bracket of
the PS-15 into rail (D) of the helmet mount.
5. Place the helmet with PS-15 onto head.
6. loosen the screw (C) and move the unit for proper eye relief
adjustment.
7. Turn the fixation lever (e) down and move the unit along the rail
for vertical position adjustment. Turn the lever up and tighten it
for fixation of vertical position.
8. Push the button (F) and move the PS-15 along the slide rail for
comfortable position.
9. The PS-15 helmet mount has a flip-up mechanism. Push the
button (G) on the side of mount and lift the unit up until the unit
gets fixed in the top position. When the device reaches the top/
upper position it will turn off automatically.
10. Push the same button (G) to lower PS-15 to viewing position.
The unit will automatically turn back on again for continuation
of the operation.
11. The mounting mechanism of helmet mount can be detached
from headgear. Pull the knob (H) and move the mounting
mechanism down along the rail.
b
C
d
FIGURE 3-2. ATTACHING ATN PS-15 TO HElMET MOUNT
E
H
F
G
A
A
3-3