Asterisk Cli; Network Settings - ATCOM IPPBX IP02 Product Manual

3.24 Asterisk CLI

These are some of the available CLI commands that can be executed from the console, you can
input the asterisk CLI commands from the web page directly.
After click on OptionsAdvanced OptionsShow Advanced Options, please select the
Asterisk CLI option from the vertical menu on the left, then you can get the following screen:
Here I input help command in the textbox, so I can get all the command which I can use in CLI
mode.

3.25 Network Settings

In order to give a static and permanent IP address for IP02, you have to set it in web GUI. After
you enter into the web GUI of IP02, you can try to configure IP address according to the following
www.atcom.cn 38