Planet WGT-702 User Manual

Gigabit ethernet media converter
Hide thumbs Also See for WGT-702:

Advertisement

Quick Links

Trademarks
Copyright © PLANET Technology Corp. 2004.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technol-
ogy Corp. The information in this manual is subject to
change without notice. All other trademarks belong to
their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware
will work properly in all environments and applications,
and makes no warranty and representation, either
implied or expressed, with respect to the quality, per-
formance, merchantability, or fitness for a particular
purpose.
PLANET has made every effort to ensure that this User's
Manual is accurate; PLANET disclaims liability for any
inaccuracies or omissions that may have occurred.
Information in this User's Manual is subject to change
without notice and does not represent a commitment on
the part of PLANET. PLANET assumes no responsibility
for any inaccuracies that may be contained in this User's
Manual. PLANET makes no commitment to update or
keep current the information in this User s Manual, and
reserves the right to make improvements to this User's
Manual and/or to the products described in this User's
Manual, at any time without notice.
If you find information in this manual that is incorrect,
misleading, or incomplete, we would appreciate your
comments and suggestions.

FCC Warning

This equipment has been tested and found to comply
with the regulations for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated in
a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not

Advertisement

Table of Contents
loading

Summary of Contents for Planet WGT-702

  • Page 1: Fcc Warning

    All other trademarks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, per- formance, merchantability, or fitness for a particular purpose.
  • Page 2 Revision User’s manual for PLANET Gigabit Ethernet Media Converter For Models: WGT-702, WGT-702S, WGT-705A, WGT-706A15, WGT-706B15 Rev 3.0 (December. 2004) Part No. EM-WGT7v3...
  • Page 3: Table Of Contents

    Table of Contents Chapter 1 Overview About Media Converter About Link Pass Through Chapter 2 Product Features Chapter 3 Model List Chapter 4 Checklist Chapter 5 DIP Switch Chapter 6 Installing the Converter to Chassis Chapter 7 Manage the Media Converter Chapter 8 LED Indicators Chapter 9 Link Through Function Chapter 10 Product Specification...
  • Page 4 This page is intentionally left blank...
  • Page 5: Chapter 1 Overview

    Chapter 1 OVERVIEW Thank you for purchasing the PLANET Gigabit Ethernet Media Converter products. The Gigabit Ethernet Media Converter introduced here provides one channel media conversion between the 1000Base-T and 1000Base-SX/LX, 1000Base-SX/LX through SFP Mini-GBIC (Model: WGT-705A), or the 1000Base-LX WDM (Model: WGT-706A15/B15).
  • Page 6: Chapter 2 Product Features

    Chapter 2 PRODUCT FEATURES • One-channel media conversion between 1000Base-T and 1000Base-SX/LX/LX WDM • Provide one 1000Base-T and one SFP Mini-GBIC port supporting either multi-mode or single-mode (Model: WGT-705A) • Provide one 1000Base-T and 1000Base-LX WDM (Model: WGT-706A15/B15) • Fiber media allows: multi-mode fiber and single-mode fiber using SC connector •...
  • Page 7: Chapter 3 Model List

    Chapter 3 MODEL LIST Your Gigabit Ethernet Converter comes with one of the following models. • WGT-702 1000Base-T to 1000Base-SX (SC) • WGT-702S 1000Base-T to 1000Base-LX (SC) • WGT-705A Depend on the SFP Mini-GBIC module capacity • WGT-706A15 1000Base-T to 1000Base-LX (WDM) •...
  • Page 8: Chapter 4 Checklist

    Chapter 4 CHECKLIST Your WGT-70x carton should contain the following items: • The Gigabit Etherne Media Converter • AC-DC Power Adapter (Output: 7.5VDC, 1.5 A max.) • This user’s manual If any item is missing or damaged, please consult the dealer from whom you purchased your Gigabit Ethernet Media Converter, the WGT-70x.
  • Page 9: Chapter 5 Dip Switch

    Chapter 5 DIP SWITCH There is a DIP switch for the setting on copper and fiber port. Refer to the table below for more details. Fiber is Forced Mode Switch 1 Fiber is Auto-Negotiation LLR enable Switch 2 LLR disable 1.
  • Page 10: Chapter 6 Installing The Converter To Chassis

    Chapter 6 INSTALLING THE CONVERTER TO CHASSIS Step 1- Unscrew and pull out the media converter board. Step 2- Remove a blank faceplate from an empty expansion slot on the front of the chassis. The module can be installed in any expansion slot. Step 3- Slide the module into the expansion slot, aligning it with the guiderails, until it firmly connects to the chassis’...
  • Page 11: Chapter 7 Manage The Media Converter

    Chapter 7 MANAGE THE MEDIA CONVERTER The Intelligent Media Converter Chassis that can control this Smart Media Converter through the management system, this Smart Media Converter can be controlled through Web Browser, SNMP management utility and terminal emulation program. The Intelligent Media Converter Chassis will detect the setting on the DIP switches and display out the status, also the Management Chassis can control the function through the management system.
  • Page 12: Chapter 8 Led Indicators

    Chapter 8 LED INDICATORS The LED indicators give you instant feedback on status of the converter: LINK/ACT ¡ ¡ LEDs State Indication Lights on Power on (Power) Lights off Power off Lights on Linking Lights LINK/ACT Data transmitting and receiving Blinking Lights off Not Linking...
  • Page 13: Chapter 9 Link Through Function

    Chapter 9 LINK THROUGH FUNCTION Link Loss Carry Forward (LLCF) When a device connected to the converter and the TP line loss the link, the converter’s fiber will disconnect the link of transmit, so that the other ends will know that there is a linkage error on this end.
  • Page 14 Link Loss Return (LLR) The fiber ports of the Smart Media Converter have been designed with an LLR function for trouble-shooting a remote connection. LLR works in conjunc-tion with LLCF. When LLR is enabled*, the port’s transmitter shuts down when its receiver fails to detect a valid receive link.
  • Page 15 LLR must NOT be active on both ends of a  configuration. If it is, the link can never be IMPORTANT: established. *Units are shipped with the LLR function disabled (DOWN).
  • Page 16: Chapter 10 Product Specification

    Chapter 10 PRODUCT SPECIFICATION IEEE802.3ab 1000Base-T Standards: IEEE802.3z 1000Base-SX/LX Duplex Mode: Full Duplex Mode LED indicators: PWR, LINK/ACT 1000Base-T: 4 pair Cat. 5, EIA/TIA-568 100-ohm screened twisted-pair (STP), up to 100m 1000Base-SX : 62.5/125μm multi-mode fiber optic Cable cable, up to 220m 50/125μm multi-mode fiber optic cable, up to 550m 1000Base-LX :...
  • Page 18 EM_WGT7v3...

This manual is also suitable for:

Wgt-705aWgt-702sWgt-706a15Wgt-706b15

Table of Contents