Dial Plan Management Commands - Planet VIP-000 User Manual

VIP User's Manual
Coding type
G.711 μ-law
G.723
G.729AB
Note:
Size of the Voice Information Field (VIF), in bits, for a voice coder are related to the coding type and
the rate the voice coder samples a voice frame (the packet time), as shown in the table above.
sizes of a coder of values other than those shown in the table are not valid.

7.11 Dial Plan Management Commands

Among the command sets supported by the CLI, the dial plan management commands are the
most sophisticated. Some of the dial plan management commands are only allowed when VIP is in
the atpm table update state. For ease of explaining, this command set is further categorized into
several sub command sets.
Sub command set
Database update
control
Destination table
management
Hunt group table Manage atpm hunt group table
Command Line Interface
Sampling time
10 ms
20 ms
30 ms
30 ms
60 ms
10 ms
20 ms
30 ms
40 ms
50 ms
60 ms
Purposes
Ÿ
Instruct VIP to start or stop
atpm table update state.
Ÿ
Store/restore atpm tables
to/from non-volatile storage
Ÿ
Purge atpm tables
Ÿ
Erase dial plan database
from non-volatile storage
Manage atpm destination table
VIF
640
1,280
1,920
192
384
80
160
240
320
400
480
atpm table up-
date state re-
Commands
quired?
atpm req No
atpm done No
atpm re- Yes
store No
atpm store Yes
atpm purge No
atpm erase
atpm dadd Yes
atpm ddel Yes
atpm dfind No
atpm dlist No
atpm hadd Yes
VIF
73