Advertisement
3. Starting Web Management
The following shows how to start up the Web Management of the Cellular
Gateway. Note the Cellular Gateway is configured through an Ethernet
connection. Please make sure the manager PC must be set to the same IP
subnet address.
For example, the default IP address of the Cellular Gateway is 192.168.1.1,
then the manager PC should be set to 192.168.1.x (where x is a number
between 2 and 254), and the default subnet mask is 255.255.255.0.
ICG-2510W(G)-LTE
IP Address: 192.168.1.1
Logging in to the Cellular Gateway
1. Use your preferred web browser like Chrome, Edge, Firefox or other and
enter IP address https://192.168.1.1 (the factory default IP address or
the one that you have just changed in console) to access the Web interface.
2. When the following dialog appears, please enter the default user name and
password. Refer to Figure 3-2 to determine your initial login password.
Default IP Address: 192.168.1.1
Default Username: admin
Default Password: cg + the last 6 characters of the MAC ID in lowercase
Managed Ethernet Device
Model/SN:
SN: ZZZZZZYYMNNNNN
MAC:
MAC:A8F7E0XXXXXX
WARNING: 1) This device must be earthed. 2) For indoor use only!
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
PLANET Technology Corp.
RJ45/UTP Cable
Figure 3-1: IP Management Diagram
MAC ID: A8F7E0XXXXXX
Default Password:
("x" means the last 6 digits of the MAC address.
All characters should be in lowercase.)
Made in Taiwan
Figure 3-2: MAC ID Label
PC / Workstation with Web
Browser 192.168.1.x
cgxxxxxx
5
Advertisement
