Meet-Me Conference - Planet Networking & Communication IPX-2000 User Manual

Internet telephony pbx system
Hide thumbs Also See for IPX-2000:
Table of Contents

Advertisement

PLANET IPX-2000 user's manual
Table 3.17-3 Life line Configuration Settings
Field
Number pattern
Description

3.17.4 Meet-me conference

Meet-me conference enables conferencing of multiple parties from various sources. A party
could dial in a conference from an internal IP phone, an external IP phone on Internet, an analog
phone via PSTN, or an IP phone in a remote site. IP PBX allows multiple conference rooms
going concurrently using different room numbers. Before entering a meeting room, the caller has
to give the correct PIN of the room number.
Select Feature -> Meet-me conference to configure meet-me conference feature.
3.17.4.1 Add Meet-me Conference
Click <Add new> button from the left panel to add a new conference room.
Enter settings shown in Table 3.17-4.
Click Save button.
The newly added room should be displayed in Meet-me rooms panel on the left side.
3.17.4.2 Edit Meet-me Conference
Click the link of the room to edit from the Meet-me rooms panel.
Edit settings shown on the right side.
Click Save button.
3.17.4.3 Delete Meet-me Conference
Click link to the room to delete from the Meet-me rooms panel.
Click Delete button.
The deleted conference room shall disappear from the Meet-me rooms panel.
Table 3.17-4 Meet-me Conference Configuration Settings
Description
Pattern for emergency numbers. Note: this is
the pattern after digit stripping. For example,
configure 911 here even if users dial 9911 to
reach the 911 service over PSTN when the
PSTN trunk has an outbound dialplan of "9.".
Arbitrary description info.
42 of 51

Advertisement

Table of Contents
loading

Table of Contents