PLANET IPX-2000 user's manual
password must be used for both.
The Terminal Management page allows the administrator to configure trunk terminals used by IP
PBX. Select Trunk -> Trunk terminal and one can add, edit, and delete terminals. IP PBX
service must be reloaded to activate changes.
3.15.1 Add Trunk Terminal
Click <Add new> button from the left panel.
Enter settings shown in Table 4-8.
Click Save button.
The newly added terminal shall be displayed in Terminals panel on the left side.
3.15.2 Edit Trunk Terminal
Click the link of the terminal to edit from the Terminals panel.
Edit settings shown on the right side.
Click Save button.
3.15.3 Delete Trunk Terminal
Click the link of the terminal to delete from the Terminals panel.
Click Delete button.
The deleted terminal shall disappear from the Terminals panel.
Table 4-8 Trunk Terminal Configuration Settings
Field
Terminal identifier
Description
Description
A unique number consisting of digits only.
This is the trunk identifier configured on the
other IP PBX.
Arbitrary description info.
38 of 51