Table of Contents
Advertisement
PLANET IPX-2000 user's manual
IP PBX Configuration
This section introduces steps to provision the IP telephony part of the IP PBX. Please note that
reloading configuration is required in order to make new configuration effective
3.8 Usergroup Configuration
A usergroup is a logically grouping of users and their privileges. For instance, one could have
couple of usergroups in an IP telephony network, e.g. Sales, Marketing, Administration,
Accounting, and Engineering, etc. Each usergroup associates with a set of PBX features and call
routing scopes. In other words, all users in the same usergroup share the same reachability of
PBX features and final destinations.
The User Group Management page allows the administrator to manage usergroups. By selecting
User -> Usergroup, one can add, edit, or delete usergroups. IP PBX service must be reloaded to
activate changes.
3.8.1 Add Usergroup
Click <Add new> button from the left panel
Enter settings shown in Table 4-1.
Click Save button.
8
Please refer to 3.6.2 for details.
22 of 51
8
.
Advertisement
Table of Contents
