PLANET IPX-2000 user's manual
3.12 Routegroup Configuration
A routegroup groups routes into a logical superset of route patterns. Such abbreviation simplifies
the association of multiple routes with a trunk, say, a PSTN line. A route could be included in
various routegroups and a routegroup could contain one single route only.
By select Route -> Routegroup, the administrator can add, edit, and delete routegroups in the
Routegroup Management page. IP PBX service must be reloaded to activate changes.
3.12.1 Add Routegroup
Click <Add new> button from the left panel.
Enter settings shown in Table 4-5.
Click Save button.
The newly added routegroup should be displayed in Groups panel on the left side.
3.12.2 Edit Routegroup
Click the link of the routegroup to edit from the Groups panel.
Edit settings shown on the right side.
Click Save button.
3.12.3 Delete Routegroup
Click the link of the routegroup to delete from the Groups panel.
Click Delete button.
The deleted routegroup shall disappear from the Groups panel.
dialing. Say, 4 leading consecutive "w" result
in 2 seconds delay before dialing.
32 of 51