Changing The Settings - Pioneer X-SMC3-K Operating Instructions Manual

12

Changing the settings

Chapter 12:
Changing the settings
The factory default settings are indicated in italic.
1 Press SET UP to show the Initial Setup screen.
Use / to select the item, then press ENTER.
2
3 Follow the descriptions on the main display to change the setting.
Settings
Timer Setting
Clock Display
(On/On (Standby)/Off)
Time Format
(12H/24H)
Clock Adjustment
(Auto/Manual)
Time Zone
Default setting is GMT ±0.
Daylight Saving Time
(On/Off)
Display Setting
(Level3/Level2/Level1)
Network Type
(Wired/Wireless/Auto)
Network Configuration
(Wired Setting/Wireless
Setting)
WPS
(PBC/PIN Input)
Friendly Name
28
En
What it does
Setting the wake-up timer and the time the unit will be turned on.
• Select On to show clock on the sub display.
• When On (Standby) is selected, the clock will appear in the sub-display even when the power is
set to Off.
Select the 12-hour (12H) clock or 24-hour (24H) clock.
• Select Auto to adjust the clock automatically.
• Select Manual to adjust the clock manually. How to adjust the clock, see page 29.
Select the time zone of your area. Time Zone can be adjusted only when Clock Adjustment is set to
Auto.
e.g. If you are in Hawaii (GMT -10:00), use / to select Hawaii and press ENTER.
Select On when daylight saving time is in effect. The time advances 1 hour.
Dims or brightens the display.
Select the network connection type.
When Auto is selected, the network type is automatically switched between Wired and Wireless. It
is depending on the occasion when the unit is powered on.
For details on settings, see page 30.
WPS connection settings, see page 32.
The name of this system displayed on a computer or other device connected to the network can be
changed.