Wired Setting; Wireless Setting - Pioneer X-SMC3-K Operating Instructions Manual

Changing the settings

Wired Setting

Use / to select DHCP Off, then press
1
ENTER.
The IP address setting screen is displayed.
Use /// or number buttons to adjust
2
the numbers, then press ENTER.
Static IP Address
192 . 168 .
• /: Moves the adjusting digit.
• /: Increases or decreases values.
Static IP Address
The IP address to be entered must be defined within the
following ranges. If the IP address defined is beyond the
following ranges, you cannot play back audio files stored
on components on the network or listen to Internet radio
stations.
Class A: 10.0.0.1 to 10.255.255.254 / Class B: 172.16.0.1
to 172.31.255.254 / Class C: 192.168.0.1 to
192.168.255.254
Subnet Mask
If an xDSL modem or a terminal adapter is directly
connected to this unit, enter the subnet mask listed in
your ISP documentation. In most of the cases, enter
255.255.255.0.
Gateway Address
If a gateway (router) is connected to this unit, enter the
corresponding IP address.
Preferred DNS/Alternate DNS
If there is only one DNS server address listed in your ISP
documentation, enter Preferred DNS. In case there are
more than two DNS server addresses, enter Alternate
DNS in the other DNS server address field.
Proxy Setup
Select Use Proxy Server when you connect this unit to
the Internet via a proxy server. Enter the IP address of
your proxy server in the Proxy Server Address field.
Also, enter the port number of your proxy server in the
'Proxy Port' field.
2 . 4

Wireless Setting

Use / to select Manual, then press
1
ENTER.
Tip
• To select Auto, select the network name which you want
to connect to and follow the instruction from the step 4.
Available Wireless Network
AAAAA
BBBBB
CCCCC
DDDDD
Use /// to enter the SSID, then press
2
ENTER.
• /: Moves the adjusting digit.
• /: Changes displayed character.
• SOUND: Switches character types.
• CLEAR: Deletes one character at a time.
SSID
[SOUND]
Change Text
[CLEAR]
Delete One Character
12
31
En