Redialing; Automatic Redialing; Manual Redialing - Panasonic DP-2500 Operating Instructions Manual

Sending Documents

Redialing

Automatic Redialing

If a busy line is detected, the machine will redial the number up to 5
times at 3 minute interval. However, if a busy line is not detected, the
machine will redial only one time. During that time, a message will
appear as shown to the right.
A file number is shown in the upper right hand corner of the display if it
is a memory transmission file.

Manual Redialing

(see Note 1)
You can also redial the last dialed number manually by pressing
1
2
MEMORY XMT
Make sure that "MEMORY XMT" is displayed, if
"DIRECT XMT" appears, press
change to Memory Transmission.
3
4
The document(s) are stored into memory with a file
number. Then the machine dials the last dialed
number.
NOTE
1. While the unit is displaying "WAIT TO DIAL", you can press
Set original(s) face down..
XMT MODE
BASIC OPERATIONS
MEMORY XMT
WAIT TO DIAL
SALES DEPT
AMERICA ASIA
AFRICA BERLIN
ANTARCTICA BRAZIL
APOLLO CANADA
MEMORY XMT
JOB
STATUS
XMT MODE ORIGINAL
key.
REDIAL
to
MEMORY XMT
9 555 1234_
AMERICA ASIA
AFRICA BERLIN
ANTARCTICA BRAZIL
APOLLO CANADA
MEMORY XMT
JOB
STATUS
XMT MODE ORIGINAL
REDIAL to start redialing immediately.
NO.014
CHINA
1/1
LIGHTER DARKER
STN(S):0000
CHINA
1/1
LIGHTER DARKER
65