Rcv To Memory - Panasonic DP-2500 Operating Instructions Manual

PROGRAMMING YOUR MACHINE
Customizing Your Machine
No. Parameter
013 AUTO JOURNAL PRINT
014 FILE ACCEPTANCE
REPORT
017 RECEIVE MODE
022 SUBSTITUTE RCV
024 PRINT REDUCTION
025 REDUCTION RATIO
026 POLLING PASSWORD
027 POLLED FILE SAVE
028 STAMP AT MEM. XMT
031 INCOMPLETE FILE
033 XMT REDUCTION
036 RING PATTERN
DETECT (DRD)
(See Note 2)
037

RCV TO MEMORY

34
Setting
Number
1
*2
*1
2
1
*2
1
*2
1
*2
70
----
100
*1
2
1
*2
*1
SAVE
2
1
*2
*1
2
Setting
Invalid Selecting whether the machine prints the journal automatically
after every 100 transactions.
Valid
Invalid Selecting whether the machine prints the file acceptance journal.
If you set this parameter to valid, a report will print after the
Valid
document is stored into memory.
Manual Setting the reception mode to automatic or manual.
Auto
Invalid Selecting whether the machine receives to memory when the
recording paper runs out, toner runs out or the recording paper is
Valid jammed.
Fixed Selecting the print reduction mode.
Fixed :Reduce received document according to setting of
Parameter No. 25.
Auto
Auto : Reduce received document according to the length of
received originals.
70% Selecting the fixed print reduction ratio from 70% to 100%. This
parameter functions only when the fixed print reduction is selected
----
on Fax Parameter No. 24.
100%
(----) Setting a 4-digit password for secured polling. (See page 77)
Invalid Selecting whether the machine retains the polled document(s) in
memory even after the document(s) is polled once.
Valid
Invalid Selecting whether the machine stamps the originals when storing
into memory.
Valid
(depending on the Stamp setting on the Control Panel)
Invalid Selecting whether the machine retains the document in memory if
it is not successfully transmitted.
Valid
Invalid Selecting whether the machine performs reduction when the
transmitting original is wider than the recording paper used at the
Valid
receiving machine.
Invalid All ring patterns.
Valid Select a ring pattern for automatic answering.
(Select Line-1 or Line-2 first, if you have the 2nd G3 Fax
Communication Port Kit installed)
1: A Standard ring pattern.
2: B Double ring pattern.
3: C Triple ring pattern (Short-Short-Long).
4: D All other triple ring patterns, except the type C
described above.
Enter a 4-digit password for printing the received document(s) in
memory by using
(----)
06 RCV TO MEMORY
When
06 RCV TO MEMORY
is not selectable on the LCD display. (See page 107)
Comments
FUNCTION SELECT MODE
.
is set to ON, this parameter