Preparing To Be Polled - Panasonic DP-2000 Operating Instructions Manual

ADVANCED FEATURES
Polling

Preparing to be Polled

In order to let other stations poll your machine, you must prepare your machine with a document stored in
memory. Be sure to set the polling password before storing the document into memory. After being polled,
the documents stored in the memory will be erased automatically. To retain the documents in memory so that
they can be polled repeatedly change Fax Parameter No. 027 (POLLED FILE SAVE) to "Valid".
Make sure that the FAX lamp is ON. If not, press
1
a
Place original(s) face up on the ADF.
1
b
Place a book or an original face down on the Platen
Glass.
2
3
4
Enter a 4-digit polling password. (See Note 3)
Ex:
5
The document(s) will be stored into memory.
(see Note 1) (see Note 2) (see Note 3)
NOTE
1. You can still send or receive documents even when set to be polled.
2. Only 1 polled file can be stored in memory. If you need to add document(s) into the same polled file, see page 93.
3. If you have set the polling password in Fax Parameter No. 026, the password will appear on the display.
You can still change the password temporarily by overwriting it with a new one.
76
or
4 3 2 1
to select the "FAX MODE".
ENTER STATION(S)
THEN PRESS START 00%
POLLING
1:POLLING 2:POLLED
POLLED
PASSWORD=1234
POLLED
PASSWORD=4321
* STORE *
* STORE * COMPLETED
TOTAL PAGES=005
NO.=
NO.015
PAGES=001 01%
24%