Panasonic DP-2000 Operating Instructions Manual page 137

Sub-Addressing
Using Manual Number Dialing
Use FLASH to separate the Telephone number and the Sub-Address.
Make sure that the FAX lamp is ON. If not, press
1a
Place original(s) face up on the ADF.
1b
Place a book or an original face down on the Platen
Glass.
2
Enter the telephone number, press
the Sub-Address (up to 20 digits).
(Up to 36 digits including telephone number, pauses,
spaces, FLASH and Sub-Address)
Ex: Telephone number = 5551234, Sub-Address=2762
Enter as:
FLASH
3
The document is stored into memory and your machine
starts to dial the number of the station and sends the
document(s) with Sub-Addressing information.
(see Note 1) (see Note 2) (see Note 3)
NOTE
FLASH
1. separates the Sub-Address from the Telephone number and is indicated by an "s" in the display.
2. Manual Off-Hook or On-Hook Dialing cannot be used with the Sub-Addressing Transmission.
3. The Sub-Address is not transmitted during Manual Redial Mode.
or
FLASH
5 5 5 1 2 3 4
2 7 6 2
NETWORK FEATURES
to select the "FAX MODE".
ENTER STATION(S)
THEN PRESS START 00%
TEL. NO.
then enter
5551234s2762
* STORE *
PAGES=001
NO. 001
01%
135