Panasonic DP-2000 Operating Instructions Manual page 156

PROBLEM SOLVING
Troubleshooting
Info.
Code
501/502 Communication error occurred using the internal V.34
Modem.
540/541 Communication error occurred while transmitting.
542
543/544
550 Telephone line disconnected.
552/553 Communication error occurred while receiving.
554/555
580 Sub-Address transmission to a unit that has no Sub-
Address function.
581 Sub-Address Password transmission to a unit that has
no Password Sub-Address function.
630 Redial was not successful due to a busy line.
631 During dialing, STOP was pressed.
634 Redial was not successful due to no response from the
called station or wrong number dialed.
Note: If busy tone was not detected, the machine will
only redial once.
638 Power failure occurred during the communication.
870 Memory overflow occurred while storing document(s)
into memory for transmission.
(see Note 1)
NOTE
1. After identifying the problem and verifying the recommended action, if the Information Codes keep reoccurring or
for help on Information Codes that appear on your machine but are not listed above, please contact your local
Authorized Panasonic Dealer.
(For mechanical failures, see the Troubleshooting section in the Operating Instructions (For Copier) P.66)
154
Meaning Action
Check with the other party.
1. Reload the document(s) and send again.
2. Check with the other party.
Check with the other party.
Check with the other party.
Check the remote station.
Check the remote station.
Reload the document(s) and send again.
Reload the document(s) and send again.
Check the telephone number and send again.
Check the power cord and plug.
1. Transmit document(s) without storing into
memory.
2. Install Optional Memory Card.
Page
--
--
--
--
132
132
--
--
--
--
49
--