Panasonic DP-2310 Operating Instructions Manual page 39

Windows 98/Me
8. button
Spool Settings...
Specify the method of sending (spooling) documents from the program to the printer.
• Spool Data Format
Select spool data type (EMF format or RAW format). Specifying RAW format results in a longer time
elapsing before an application becomes operational after printing from it.
Note: Spooling by EMF format (enhanced metafile compression) may cause the following problems on
some application software.
1) Printing result is different from the screen display.
2) Printing requires excessive time.
• Enable bidirectional support
This setting enables reception of configuration data and status data from the printer.
9. button
Port Settings...
Modifies printer port settings.
Configuring the Printer Driver Settings
39