Operation Menu - Panasonic AJ-HD1500P Operating Instructions Manual

Setup menus
USER menu
<OPERATION>
No.
100
101
102
104
105
106
107
The underline on the setting item denotes the initial setting.
Item Setting
Superimposed Superimposed
No.
display display
SEARCH 0000
ENA 0001
SHTL MAX 0000
0001
0002
FF. REW 0000
MAX 0001
0002
0003
0004
REF 0000
ALARM 0001
AUTO EE 0000
SEL 0001
EJECT EE 0000
SEL 0001
0002
EE MODE 0000 NORMAL
SEL 0001
– 76 –
DIAL This selects the direct search dial operation.
KEY 0: For direct search dial operations.
1: Operation is not transferred to the search mode unless the
search button is pressed.
9.8 This sets the maximum speed for shuttle operations.
16 0: 9.8 normal speed
1: 16 normal speed
32
2: 32 normal speed
<Note>
Depending on the tape format, the actual tape travel speed
will differ slightly from what the superimposed display shows.
16 This sets the maximum speed for FF and REW operations.
0: 16 normal speed
32
1: 32 normal speed
50
60 2: 50 normal speed
100 3: 60 normal speed
4: 100 normal speed
<Note>
The maximum speed is automatically limited to 50
DVCPROHD/DCVPRO50 and 32 for DV or DVCAM.
OFF This selects whether to warn the operator when the
ON REF.VIDEO signal has not been connected.
0: Warning is not given.
1: Warning is given by the flashing STOP lamp.
S/F/R This selects the VTR mode in which the EE status is to be
STOP established when the TAPE/EE switch has been set to EE.
0: The EE status is established in the stop, FF or REW mode.
1: The EE status is established in the stop mode only.
<Note>
The EE output with the DVCPRO50, DVCPRO, DV or DVCAM
format is characterized by a black picture and muted sound.
EE This selects the video and audio output statuses in the eject
BLACK mode.
0: The EE status is always established regardless of the
GRAY
TAPE/EE switch position.
1: The statuses depend on the TAPE/EE switch position:
EE: The EE status is established.
TAPE: The video signals turn black; the audio signals are
muted.
2: The statuses depend on the TAPE/EE switch position:
EE: The EE status is established.
TAPE: The video signals turn gray; the audio signals are
muted.
<Note>
The EE output with the DVCPROHD, DVCPRO50, DVCPRO,
DV or DVCAM format is characterized by a black picture and
muted sound.
This selects the EE mode output signals.
THRU 0: Signals are output with a delay equivalent to the length of
internal signal processing.
1: Signals are output directly, without internal processing, and
so are output with no delay.
<Note>
When editing mode is selected, SDTI is selected as the video
input signal, the internal operations are forcibly set to
NORMAL.
Description
for