Western Digital Array Management Setup User Manual page 64

7. In the following windows, do the following actions. Click Next to move to the next
window.
- Select Primary Partition
- Specify the maximum available partition size in MB
- Assign the available drive letter of your choice
- Choose Format this partition with the following settings
- File system: NTFS
- Allocation unit size: Default
- Volume label: Enter your choice of name
- Do not check "Perform a quick format" or "Enable file and folder compression"
8. Review your selections and click Finish. The New Partition Wizard will disappear while
partitioning and formatting begin.
This process will take some time. The Disk Management window displays the progress.
Figure 44. The newly formatted array as it appears under Disk Management
WD ARRAY MANAGEMENT SETUP
USER MANUAL
APPENDIX B: PARTITION AND FORMAT - 60