Chapter 5: RAID Monitoring and Maintenance
with AMS
This chapter describes using AMS to monitor and manage your RAID system. The chapter is
divided into sections for as follows:
Remote AMS
!
Local AMS
!
User Management
!
Alert Notification
!
Controller
!
Arrays
!
Remote AMS
Create a RAID Server
Remote AMS works over your network. Therefore it requires additional steps the first time
you log on. Launch Remote AMS. When the AMS user interface appears:
1. Right-click on the My Console icon
- Select New > Server from the popup menu.
- Click the New Server
A RAID Server icon appears.
Figure 29. Make a New RAID Server
and:
icon in the Toolbar.
Figure 30. RAID System Configuration Box
CHAPTER 5: RAID MONITORING AND MAINTENANCE WITH AMS - 31
WD ARRAY MANAGEMENT SETUP
USER MANUAL