Getting Connected; Audio Connections - VocoPro DVX-668K Owner's Manual

Getting Connected

Audio Connections

Recording Music and Microphone Vocals using the Stereo Outputs
What you will need:
• 1 RCA L/R (red & white) audio cable
• Audio Recording Device with RCA L/R inputs
1. Connect one end of the L/R RCA audio cable to the
L and R (red & white) RCA Output channels on the
DVX-668K's rear panel.
2. Connect the other end of the L/R RCA audio cable
to the L/R RCA audio inputs on an audio recording
device.
5.1 Audio
Connecting to a 5.1 Surround Sound Receiver
What you will need:
• 6 RCA-style surround sound cables
• A 5.1 surround sound receiver or amplifier
1. Connect an end of each RCA cable to the FL, FR,
CEN, SL, SR, and SUB outputs on the rear panel of
the DVX-668K.
2. Connect the other end of each RCA cable to the
FL, FR, CEN, SL, SR, and SUB inputs on a 5.1 CH.
Surround Sound receiver or amplifier.
For more information on setting up 5.1 Surround
Sound, see the "Setup Menu" section.
NOTE: Microphone vocals will only be output through
the Front Left and Front Right Channels.
• FL - Front Left
• FR - Front Right
• CEN - Center
• SL - Side Left
• SR - Side Right
• SUB - Subwoofer
NOTE: The actual inputs may be labeled differently on certain receivers and amplifiers.
������ ���
���� �����
��� �����
��
��
��
��
�����
�����
8
�����
����
��� ����� ��� �����
��� �� � � �����
��� �� � ������� �����
�
��� ��
��� �� � �������
�����
����� �����
����� ������
�����
��������� ������
���� �����
����� �����
��������
�������� ��� ������
������
��������
�����
���� �����
������� �������
��������
���� �����
�������� ����� ��������
���� �����
�������� ��������� ������