Getting Connected; Connecting Power; Powering Another Device - VocoPro SONIC STATION Owner's Manual

Getting Connected

Because the Sonic Station has built-in speakers, DVD/CD/CD+G player, and AM/FM Tuner there is not a lot of
additional setup necessary. Additional setup options include connecting to a TV / monitor (RCA, S-VIDEO, Component)
or another audio input device (RCA or Coaxial). The sonic station can also be used to play an Mp3 Player such as an
Ipod and up to two additional audio/video output devices such as CD and DVD players (RCA).

Connecting Power

[Fig. B]
To power the Sonic Station:
What you will need
• 1 AC power cord (included)
• Surge-protector (recommended) or a power outlet
NOTE: Before turning on the power make sure the red voltage selector [Fig. A] under
the AC INPUT is set to the proper voltage. It should be set to 115V for North America
and 220V for most European countries. Make sure you know the proper voltage for
your region before turning on the Sonic Station.
1. Connect the AC end of the power cord into the AC INPUT on the rear panel of the Sonic Station
2. Connect the other end to a surge-protector or available power outlet
�� ��
�� ������� �� ����
�� ����
������� ��������
�� ������� �� ����
������ ����������

Powering another Device

The sonic station can be used to power a second device such as Mp3 player or DVD player.
Simply connect the device's power cord to the power outlet labeled OUTLET UNSWITCHED on the rear panel of the
Sonic Station.
������
Fig. B
[Fig. C]
�� ��
�� ������� �� ����
�� ���� ������
������� ��������
�� ������� �� ����
������ ����������
Fig. C
8
�� ��
�� ������� �� ����
�� ���� ������
������� ��������
�� ������� �� ����
������ ����������
Fig. A