VocoPro DVX-668K Owner's Manual page 14

General Operations
Scanning through Tracks (CD, VCD, DVD and USB only)
1. Use the buttons on the remote control to scan through tracks.
2. The button scans forwards through the current track and the
Adjusting the Disc Music Volume
1. Use the VOL + and VOL - buttons on the remote control to adjust the volume.
2. The VOL + button raises the volume and the VOL - button lowers it.
Using Direct Track Access
The Direct Track Access buttons are the number buttons on the remote control. These allow you to jump
directly to a track or chapter (DVD) by entering its number. When using Direct Track Access on the remote
control, type the two digit equivalent of the number.
example
To jump directly to track 9
1. Press 0 then 9.
2. Track 9 will begin playing.
Jumping to a Specific Time on a track (CD, VCD and DVD only)
1. Press the TIME button on the remote control until "Track Go To" is selected.
2. Use the number buttons to enter the time in minutes and seconds.
3. The disc will play at that time.
example
To jump directly to 1:45
1. Press TIME on the remote control twice to select "Track Go To".
2. Press 0, 1, 4, then 5.
3. The track will begin playing at 1:45 minutes into the track.
Jumping to a Specific Time on a disc (CD, VCD and DVD only)
1. Press the TIME button on the remote control until "Disc Go To" is selected.
2. Use the number buttons to enter the time in minutes and seconds.
3. The disc will play at that time.
example
To jump directly to 21:38
1. Press TIME on the remote control three times to select "Disc Go To".
2. Press 2, 1, 3, then 8.
3. The track will begin playing at 21:38 minutes into the DISC.
backwards through the current track.
14