Advertisement
BACK PANEL
1. 6-Pin Socket - This is a connection
that needs to be made when
installing the DKP-3 into a
compatible Vocopro unit.
2. 2-Pin Socket - This is a connection
that needs to be made when
installing the DKP-3 into a
compatible Vocopro unit.
3. USB Power Jack - This jack is
meant for the USB power cord
when using the DKP-3 as a
Stand-Alone unit.
2 3
1
16
Specifications and Functions
The DKP-3 is compatible with the formats
and resolutions listed below. A file converter
program maybe required to change files found
on the internet or files ripped from a disc into
the appropriate file types that are compatible
with the DKP-3.
THE APPROPRIATE FILE TYPES TO USE WOULD
BE:
1. AVI
2. MP3
3. MP3+G
4. VOB
5. VCD
6. JPEG
THE APPROPRIATE VIDEO RESOLUTIONS ARE:
1. 640 x 320
2. 320 x 240
3. 4:3 aspect ratio
•
The DKP-3 will not recognize files that are
not compatible with it: unsupported files
will not be displayed in the file explorer.
•
File resolutions greater than 640 x 320
will not playback. They will show up in the
file explorer but will display "Unsupported
Format" when played.
21
General Operations
When the SD card is inserted in the DKP-
3, the compatible files will be sorted into
three categories: Music, Pictures, ad Video.
Files of the same category will be listed
sequentially no matter what folder they might
be held in on the SD card. Always use the
number automatically assigned by the DKP-3
for any playlist or Go-To entries.
SETTING UP A PLAYLIST
1. Press the playlist button.
2. Use the number pad to enter tracks.
Press the Playlist button to confirm their
addition to the list.
3. Repeat, for up to 30 tracks.
4. Press Play to initiate the playlist.
- At any point during playback, it is
possible to press the Playlist button
again to edit the playlist.
- Only files from the same category
(music, pictures, or video) can be added
to the current playlist.
- Flies of the same category but different
playback folder can be added to the
playlist.
See Specifications & Functions for
details.
Getting Connected
The DKP-3 can be used as either a
stand-alone SD card player or it can be
incorporated in a compatible karaoke
machine. The instructions below cover both
situations;
Stand-Alone and Installed use.
Note: Please visit Vocopro.com for a list of compatible
machines.
17
COMPATIBLE
FILES
ARE
AUTOMATICALLY
FILTERED INTO THESE CATEGORIES:
Music
Pictures
Video
IN THE FILE EXPLORER:
•
To select from the different categories,
press LEFT or RIGHT on the directional
pad to highlight the desired icon. Press
ENTER to confirm.
22
STAND ALONE USE
To use the DKP-3 as a stand-alone device,
you'll need:
• DKP-3
• Remote Control
• AV Cable
• USB Cord with Adapter (not included)
• Optional - RCA Cable (not included)
1. Take the USB power cord and connect to
the USB Power Jack on the back of the
DKP-3.
2. Connect the AV Cable into the AV Out
Jack on the face of the DKP-3.
3. Connect the Yellow RCA end directly into
the TV/Monitor to be used as a display.
4. Connect the Red/White RCA ends into
the amplifier/sound system to be used.
NOTE: The AV Cable may be too short to connect
directly to the display or sound system, use an
RCA cable to lengthen the leads to their respective
connections.
1
2
Front Panel
Back Panel
3
4
AMP
18
•
To select a different playback folder,
select from the list of folders on the left-
hand side of the file explorer.
Note: The files contained in each folder will be
displayed on the right-hand side of the file explorer.
Note: The DKP-3 can only access 1 folder at a time.
•
To see the full file names of tracks within
each folder, press the Menu Switch
button; this will list the contents of
the folder across the entire screen for
easier navigation. Press Menu Switch to
toggle between both views.
23
INSTALLING INTO COMPATIBLE
VOCOPRO UNIT
To install the DKP-3 into a compatible
karaoke machine, you'll need:
• A compatible Vocopro unit (not included)
• DKP-3
• Remote Control
• Phillips screwdriver (not included)
1. Locate the Stereo Expansion Port on
back of the compatible Vocopro unit.
2. Remove the two Phillips screws and
metal faceplate covering the Stereo
Expansion Port.
3. Locate the two white plugs, a 2-pin and a
6-pin plug.
4. Firmly insert both plugs into their
respective sockets on the back of the
DKP-3.
5. Slide the DKP-3 into the Stereo
Expansion Port and secure with Phillips
screws.
NOTE: The USB Power jack is not used when installed
into a compatible Vocopro unit.
19
•
When adding multiple folders of the
same category (music, pictures, or
videos), the DKP-3 will list all the files in
sequential order starting with the first
file in the first folder.
24
1
2
3
20
Commonly Asked Questions
1. Why aren't my files showing up in the
file explorer?
Double-check that they are the
appropriate format. Also, if the card
shows up empty, it may need to be
reformatted.
2. What format does the SD card need to
be?
The card needs to be formatted in FAT
or FAT32. The DKP-3 will not recognize
cards formatted in NTFS.
3. Can I delete files directly form the DKP-
3?
No, the DKP-3 can only play files back.
It cannot edit the files on the SD card in
any way.
4. What are Multiplexed files?
Multiplexed refers to types of files and
CD+Gs that have their audio configured
so that all vocal audio emanate form
the Right channel and all music audio
emanate from the Left channel. The
MPX button routes the left channel
through both Left & Right speakers,
effectively removing the vocals.
5. What is the maximum SD card size
that can be used?
The DKP-3 is compatible with cards up
to 32GB in size; SD and SDHC cards
only.
6. The DKP-3 is the same size as my UHF-
5800 channel module. Can I install the
DKP-3 into that receiver?
No, the DKP-3 requires specific
connections to install. Please check
Vocopro.com for compatible units.
7. What do I do if some accessories are
missing?
Please call Vocopro at 800-678-5348
regarding any missing or defective parts.
25
Advertisement
