Trane CVGF-SVU02B-E4 Operation And Maintenance Manual page 25

Main screen content can be
viewed by selecting the up or
down arrow icons. The Main
screen is the default screen.After
an idle time of 30 minutes.
DynaView ™ (DV) is the operator
interface of the Tracer CH530
control system utilized on the
CTV machines. The DynaView
enclosure is 9.75" (24.8 cm)
wide, 8" (20.3 cm) high and 1.6"
(4.1 cm) deep. The DynaView
display is approximately 4" (10.2
cm) wide by 3" (7.6) high.
Features of the display include a
touch screen and long life LED
backlight. This device is capable
of operating in 0 - 95 percent
relative humidity (non-
condensing). The enclosure
includes a weather tight
connection means for the RS232
TechView ™ connection.
CVGF-SVU02B-E4
Unit Control
Panel (UCP)
Touch screen key functions are
determined completely in the
software and change depending
upon the subject matter
currently being displayed. The
user operates the touch sensitive
buttons by touching the button
of choice. The selected button is
darkened to indicate it is the
™
selected choice. The advantage
of touch sensitive buttons is that
the full range of possible choices
™
as well as the current choice is
always in view.
Up or down arrow buttons are
used to allow a continuously
variable setpoint, such as
leaving water setpoint. The value
changes by touching the up or
down arrows.
Action buttons are buttons that
appear temporarily and provide
the operator with a choice such
as Enter or Cancel. The operator
indicates his choice by touching
the button of choice. The system
then takes the appropriate action
and the button typically
disappears.
DynaView ™ consists of various
screens, each meant to serve a
unique purpose of the machine
being served. Tabs are shown
row across the top of the display.
The user selects a screen of
information by touching the
appropriate tab. The folder that
is selected will be brought to the
front so it's contents are visible
25