TP-Link TL-WA701ND User Manual page 23

1) Click Survey, then the window displaying a list of available SSIDs will appear in Figure
3-8.
2) Find the SSID of the Access Point / Router or WISP, and click Connect in the corresponding
row. You will then return to the page shown in Figure 3-11.
3) Select the security mode and enter the password that is the same as on the root AP.
4) Click Next, you will then come to Network Setting page for furthers configuration.
5. When you have configured Wireless Settings in step 4, The Network Setting page will
appear then, shown in Figure 3-12. It is recommended that you keep the default settings on
this page.
Note:
1. These settings are only for basic wireless parameters, for advanced settings, please refer
to Section 4.7 Wireless.
2. To change to another mode, please refer to T3 in Troubleshooting to assign a static IP
address 192.168.0.100 for your computer first before logging in the management page.
6. Click the Next button. You will then see the Finish page. Here takes the settings for Access
Point mode for example.
Because there is something changed of the configuration, you will see the Finish page as
shown in Figure 3-13. Check your settings and click Save to save your settings for future
reference.
TL-WA701ND 150Mbps Wireless N Access Point User Guide
Figure 3-12 Network Settings
15