Nylon Line Head Disassembly Instructions; Nylon Line Replacement - Echo SRM-266T Operator's Manual

SRM-266T

Nylon Line Head Disassembly Instructions

Note: For normal use, Speed Feed
necessary. However, if circumstances require
disassembly, follow these instructions.
1. Press top of locking tabs (A) on both sides of Speed Feed
head to release cover (B) from eyelet carrier(C).
2. Remove cover from eyelet carrier.

Nylon Line Replacement

Wear Gloves or personal injury may result:
• Cutoff knife is sharp.
• Gearcase and surrounding area may be hot.
1. Cut one piece of line to recommended length.
.080 (2.0 mm) dia. – 20' (6 m)
.095 (2.4 mm) dia. – 20' (6 m)
2. Align arrows on top of knob with openings in eyelets.
3. Insert one end of trimmer line into an eyelet, and push line
equal distance through trimmer head.
X7502026103
© 6/2013 ECHO Inc.
© head disassembly is not
©
C
MAINTENANCE
A
B
27