Nylon Line Head Disassembly Instructions - Echo GT-225SF Operator's Manual

MAINTENANCE
4. Hold trimmer head while turning knob counter clockwise to
wind line onto spool until about 13 cm (5 in.) of each line
remains exposed.
Trimmer head is now fully loaded and ready for operation.
When the wear indicators located at the bottom of the
Speed-Feed® head are worn smooth, or if holes appear,
replacement of the cover or the entire Speed-Feed® head is
required.

Nylon Line Head Disassembly Instructions

Note: For normal use, Speed Feed® head disassembly is not
necessary. However, if circumstances require
disassembly, follow these instructions.
1. Press top of locking tabs (A) on both sides of Speed
Feed® head to release cover (B) from eyelet carrier (C).
2. Remove cover from eyelet carrier.
26
GT-225SF
Wear Indicators
A
B
C
X7732272400
© 9/2015 ECHO Inc.