1. Go online with DX Navigator.
2. In the Found Devices tab, select the device you wish to rename. The device must be
online (green check mark appears in front of Device Icon).
3. Either
<R+CLICK>
popup menu.
4. The Password dialog opens. Login as an administrator.
5. Type a name in the Rename Device dialog, and
Menu Commands
•
Rename
Device Designs
Description
With device designs (also referred to simply as 'designs'), DX Navigator allows you to setup
and configure DX devices offline. By opening a generic Device Window for a particular device
type, you can edit the device's settings just as though you were controlling the hardware
on the Device Icon, or select Rename from the Edit or R-click
Changes the name of either a hardware device (from the Found
devices tab), or a device design (from the Design tab). Names
can be up to 32 alphanumeric characters; double quote and
question mark characters are disallowed. Device Names are
stored in hardware memory, and are retained when the unit is
power cycled. Design Names are saved in Site Files.
<CLICK>
OK.
11