Emergency Keys - DSC New Classic PC585 User Manual

Emergency Keys

PK/RFK55XX Keypads
Press the (F), (A) or (P) key for 2 seconds to generate a Fire, Auxiliary or Panic
alarm. The keypad sounder will beep indicating that the alarm input has been accepted and
transmission to the central station is underway. Ask your alarm company if the emergency
keys are available on your system.
NOTE: The Fire keys can be disabled by the installer.
LED5511/LCD5511 Keypad
Press and hold both keys simultaneously for 2 seconds to send the following messages:
Fire Message, Auxiliary Message, Panic Message.
PC1555RKZ Keypad
Press the [F] key for two seconds to send a FIRE transmission.
Press the [A] key for two seconds to send an AUXILIARY transmission.
Press the [P] key for two seconds to send a PANIC transmission.
IMPORTANT NOTE (All Keypads): The Fire, Auxiliary and Panic Keys will NOT function
unless programmed by the installer. If these keys are in service and the installer has
enabled audible feedback, holding down the key for two seconds will cause the
keypad sounder to beep, indicating that the input has been accepted and transmission
is underway.
NOTE: In the U.S.A. the [A] and keys are programmed to be used for non-medical
emergencies only, as per UL requirements.
6