DSC New Classic PC585 User Manual page 4

To reduce the risk of fire, electric shock and/or injury, observe the following:
• Do not spill any type of liquid on the equipment.
• Do not attempt to service this product yourself. Opening or removing the cover may
expose you to dangerous voltage or other risk. Refer servicing to qualified service
personnel. Never open the device yourself.
• Do not touch the equipment and its connected cables during an electrical storm; there may
be a risk of electric shock.
• Do not use the Alarm System to report a gas leak if the system is near a leak.
REGULAR MAINTENANCE AND TROUBLESHOOTING
Keep your Alarm Controller in optimal condition by following all the instructions that are
included within this manual and/or marked on the product.
• Clean the units by wiping with a damp cloth only.
• Do not use abrasives, thinners, solvents or aerosol cleaners (spray polish) that may enter
through holes in the Alarm Controller and cause damage.
• Do not use any water or any other liquid.
• Do not wipe the front cover with alcohol.
Occasionally, you may have a problem with your Alarm Controller or telephone line. If this
happens, your Alarm Controller will identify the problem and displays an error message.
Refer to the provided list when you see an error message on the display. If additional help is
required, contact your distributor for service.
This equipment, PC585 Alarm System, shall be installed and used within an
WARNING:
environment that provides the pollution degree max 2 and over-voltages category II non-
hazardous locations, indoor only. It is designed to be installed, serviced and/or repaired by
service persons only [service person is defined as a person having the appropriate technical
training and experience necessary to be aware of hazards to which that person may be
exposed in performing a task and of measures to minimize the risks to that person or other
persons]. For EU and Australian markets, the equipment is permanently connected; a read-
ily accessible disconnect device shall be incorporated into the building installation wiring.
For North America the equipment is a direct plug-in connection; the socket outlet shall be
installed near the PC585 and shall be easily accessible. The plug of the direct plug-in
transformer serves as the disconnect device.
IMPORTANT SAFETY INSTRUCTIONS
TROUBLESHOOTING
CLEANING
ii