Table of Contents
Advertisement
Different IPv4 and IPv6 protocol types specified will bring up different configuration
web page.
If you choose Static as IPv4 protocol type, click the Static tab to open the following
page:
Available parameters are listed as follows:
Item
IP Address
Subnet Mask
Gateway IP
Address
DNS Server IP
Address
Vigor300B Series User's Guide
Description
Type the IP address specified for such profile.
Use the drop down list to choose the subnet mask for such
profile.
Type a public gateway address for such WAN profile.
- click it to remove the IP address if you are not
satisfied with it.
Add – Click this button to display the IP address field for
adding a new IP address. Type the IP address on the tiny
boxes one by one.
Save – After finished the IP address configuration, click
Save to save the setting onto the router.
29
Advertisement
Table of Contents
