Table of Contents
Advertisement
Service Type
Queue Number
Apply
Cancel
4.
Enter all the settings and click Apply.
5.
The outgoing filter for QoS Policer has been created.
Vigor300B Series User's Guide
Choose one of the service types from the drop down list. If
you want to create a new service type, simply click
open the following dialog.
Profile – type a new name for such service type.
Protocol –There are two options: TCP, UDP and
TCP/UDP. Select the protocol that you want to use.
Source Port Start /End - Type the start /end number for the
port range of the source port for such filter.
Destination Port Start / End - Type the start /end number
for the port range of the destination port for such filter.
Choose a queue number to category the packets matching
with the condition configured as above. Queue 7 is the
highest; 0 is the lowest.
Click it to save the configuration and exit the page.
Click it to exit the page without saving the configuration.
177
to
Advertisement
Table of Contents
