Table of Contents
Advertisement
A
Scan results will be displayed in the tab of Network, please check if the wireless device
(access point or another computer) with the SSID you wish to connect is shown here.
Scan result includes 5 types of information, they are:
The SSID (Service Set Identifier) of wireless device. If nothing is displayed
A
here, it means the SSID of this wireless device is hidden.
If a
you've established connected with that wireless device.
B
The type of this wireless device and the channel number of this wireless
device.
The wireless standard supported by this access point is displayed here.
C
'n' for 802.11n
802.11b
WPS icon
access point uses encryption, a key icon
Note: When the access point supports WPS and WPS icon
you will not see the key icon
encryption.
D
Shows the signal strength of access point by percentage.
E
Shows the bar graph of the signal strength.
B
C
symbol appears in front of the name of wireless device, means
Means this wireless device is an access point
Means this wireless device is a computer (Ad-Hoc mode,
point-to-point connection)
, 'a' for 802.11a
.
will appear when the access point supports WPS. If the
20
D
E
, 'g' for 802.11g
will appear.
here even through the access point uses
, and 'b' for
is appeared,
VigorN65 User's Guide
Advertisement
Table of Contents
