Dodge 2009 Aspen Owner's Manual page 17

the actual AVG. MPG when either the Multi Displace-
ment System (MDS) is active or the vehicle is operat-
ing in electric mode (i.e. engine stopped and propul-
sion enabled). Refer to "Multi Displacement System
(MDS)" under "Starting and Operating" in your Own-
er's Manual for further information.
• MI TO EMPTY (Distance To Empty) – Shows the
estimated distance that can be traveled with the fuel
remaining in the tank. This estimated distance is
determined by a weighted average of fuel economy,
according to the current fuel tank level. MI TO EMPTY
cannot be reset through the RESET button.
NOTE: Significant changes in driving style or vehicle
loading will greatly affect the actual drivable distance of
the vehicle, regardless of the DTE displayed value.
• When the DTE value is less than 30 mi (48 km)
estimated driving distance, the DTE display will
change to a text display of LOW FUEL. This display
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 15
will continue until the vehicle runs out of fuel. Adding
a significant amount of fuel to the vehicle will turn off
the LOW FUEL text and a new DTE value will
display.
• Global Reset – If the RESET button is pressed twice
within two seconds while in any of the three resettable
displays (AVG. MPG, ET (ELAPSED TIME) and TRIP),
all three displays will be reset.
Personal Settings (Customer-Programmable
Features)
Personal Settings allows the driver to set and recall
features when the transmission is in PARK. If the trans-
mission is not in PARK the EVIC will display NOT
AVAILABLE and VEHICLE NOT IN PARK.
Press and release the MENU button until the
Personal Settings displays on the EVIC.
3