Maintenance - Dimplex DS4411 Owner's Manual

Maintenance

WARNINg: Disconnect
power before attempting any
maintenance or cleaning to
reduce the risk of fire, electric
shock or damage to persons.
CAUTION: allow at least
10 minutes for light bulbs
and heater to cool off before
touching bulbs to avoid
accidental burning of skin.
Light Bulb Replacement
Light bulbs need to be replaced
when you notice a dark section
of the flame or when the clarity
and detail of the log exterior
disappears. There are two (2)
bulbs located under the log set
which generate the flames and
embers.
Helpful Hints: It is a good idea to
replace all light bulbs at one time
if they are close to the end of their
rated life. Group replacement will
reduce the number of times you
need to open the unit to replace
light bulbs.
Light Bulb Requirements:
Quantity of two (2) clear
chandelier or candelabra bulbs
with an E-12 (small) socket base,
25 Watt rating.
Figure 3
access Panel
Required tools: Phillips screw
driver.
Replacement:
1. Remove the five screws from
the access panel, located
on the back of the unit, and
remove access panel.
2. Locate and examine the bulb
to determine if replacement is
required.
3. unscrew the bulb counter
clockwise.
4. Insert new bulbs.
5. Secure access panel to unit.
Clear Door Panel Cleaning
The clear door is cleaned in
the factory during the assembly
Light
Bulbs (2)
Screws
11