Manual Answer Mode - Viking FAXJ-1000 Technical Practice

Faxjack phone/fax switch
Hide thumbs Also See for FAXJ-1000:
Table of Contents

Advertisement

2. Automatic Answer Mode Incoming Call Sequence, Caller ID Disabled
CO Ring
Answer
FAXJ-1000 Listening Time
Ring Back Tones
FAXJ-1000 Ringing Appropriate Port
Called Device Answers
B. Manual Answer Mode
Note:
Operation
In the manual answer mode, CO ringing passes directly through to the Phone 1 port. In this mode, the FAXJ-1000
waits for the call to be manually answered by the Phone 1 port and then begins watching for fax CNG tones or touch
tones to route the call. The Phone 1 port will continue to ring, subject to the Ring Limit (see Operation, section F). If
the call is answered by the Phone 1 port and a fax CNG tone is detected, the FAXJ-1000 provides a busy signal to
Phone 1 and starts ringing the call to the FAX port. Phone 1 can also dial a touch tone transfer command to transfer
the call to another port (see Operation, section C). Following the transfer command, the FAXJ-1000 provides a busy
signal to Phone 1 and starts ringing the call to the appropriate port.
C. Transfers
While the FAXJ-1000 is a four-port unit, only one port can be connected to
the phone line at any given time. If, for example, the Phone 1 port is using
the line and any of the other ports tries to make a call, they are given an
internally-generated busy signal. However, the FAXJ-1000 has the ability to
transfer calls from one port to another.
Calls are transferred by dialing "#" + the number associated with the port you
want to transfer the call to. These two touch tones must be the first touch
tones dialed by the phone or device making the transfer in order to prevent
accidental transfers during other dialing sequences.
When a transfer command is detected, the transferring port is provided with a busy signal and the FAXJ-1000 starts
ringing the port that the call is being transferred to. It keeps track of the port that initiated the transfer so it can ring that
port back if the called port doesn't answer. Any FAXJ-1000 port that is connected to the phone line can transfer and
there is no limit to the number of transfers on a given call.
Note:
6
1
2
4 seconds
3
G
CO LINE IN
#0
FAXJ-1000
4 seconds
3
4
4
5
FAXJ-1000
Touch Tone
Port
#1
Fax
#2
Modem
#3
Phone 1
#4
Phone 2
FAXJ-1000

Advertisement

Table of Contents
loading

Table of Contents