The warning symbol
lights and
goes out again after 2 seconds when...
• the car is started. (The lamp lights for a
system check.)
The LED in the button goes out and the
text "DSTC SPIN CONTROL OFF" is
shown in the display when...
• The SC function of the DSTC system has
been reduced with the DSTC button.
The warning symbol
steady amber glow and the text
"TRACTION CONTROL TEMPORARILY
OFF" is shown in the display when...
• the TC function of the brake system has
been temporarily reduced due to high
brake temperature. The TC function is
reactivated automatically when the brake
temperature returns to normal levels.
The warning symbol
steady amber glow and the text "ANTI-
SKID SERVICE REQUIRED" is shown in
the display when...
• The DSTC system has shut down due to a
fault.
shines with a
shines with a
Starting and driving
Emergency Brake Assistance
(EBA)
The (EBA) function is integrated in the DSTC
system and is designed to provide immediate
maximum braking force whenever rapid brake
application is necessary. The system detects the
need for heavier braking by registering how
quickly the brake pedal is applied.
The EBA function is active at all speeds. For
reasons of safety, it cannot be switched off.
When the EBA function is activated,
the brake pedal sinks while maximum braking
force is applied. Continue braking without
releasing the brake pedal. The EBA function
disengages when the pressure on the brake
pedal is released.
WARNING!
Under normal driving conditions, the DSTC
system improves the car's road safety, but
this should not be taken as a reason to
increase speed. Always follow the usual
precautions for safe cornering and driving
on slippery surfaces.
109